The large-scale biogas project effectively develops and utilizes the manure pollution of the farm, controls the environmental pollution while obtaining energy, and realizes the virtuous cycle of agricultural ecology. However, it is also necessary to pay attention to the use safety in the biological desulfurization biogas project. What protective measures are there? Next, hengneng environmental protection biological desulfurization company will take you to have a detailed understanding.
The risk prevention and control factors in large-scale biogas projects should be based on eliminating and reducing risks, implement the protection safety of each employee, build system safety, and set up plans, emergency measures and emergency strategies. When an accident occurs, emergency safety technology and management measures shall be taken in time to greatly reduce casualties and accident losses.
The personnel required for the production site of biogas project shall pass the vocational skills and safety technical training, pass the appraisal and obtain the professional qualification certificate of the corresponding industry before taking the post. Because the operators should understand the treatment process of the project and be familiar with the operation requirements and technical indicators of the post facilities and equipment; It is required to have a sufficient understanding of all links of biogas project, which is a necessary condition to ensure the smooth operation of the project. The employees of each post shall wear corresponding labor protection articles and do a good job in safety and health at all times.
Fire fighting equipment and protective safety equipment are some protective facilities that need to be equipped in large-scale biogas projects, as well as the following measures that need to be paid attention to.
1. Operators of all posts shall wear corresponding protective clothing when starting.
2. If the power supply voltage is greater than or less than 5% of the rated voltage, it is strictly prohibited to start the large motor, and the control signal power supply shall use a safe voltage lower than 36V.
3. It is forbidden to wipe the running parts of the equipment during operation, and water shall not be splashed on the cable head and motor.
4. When cleaning electromechanical equipment and surrounding environment, personnel shall pay attention to safety and pay attention to rain and snow anti-skid.