The large-scale biogas project effectively developed and utilized the farm manure, obtained the energy, controlled the environmental pollution, and realized the virtuous cycle of agricultural ecology. But in the biological desulfurization biogas project also need to pay attention to the use of safety, what are the protection measures? Let's take you to a detailed understanding.
The risk prevention and control factors in large-scale biogas projects should be based on eliminating and reducing the risk, implementing the protection safety of each employee, constructing the system safety, and setting up plans, emergency measures and emergency strategies. When an accident occurs, emergency safety technology and management measures should be taken in time to greatly reduce casualties and accident losses.
The personnel needed in the production site of biogas project should pass the training of professional skills and safety technology, pass the appraisal and obtain the professional qualification certificate of the corresponding industry before they can work. Because operators should understand the treatment process of the project, be familiar with the operation requirements and technical indicators of post facilities and equipment, and have sufficient understanding of all aspects of the biogas project is a necessary condition to ensure the smooth operation of the project. The employees of each post should wear the corresponding labor protection articles when they work, and must always do a good job in safety and health work.
Fire fighting equipment and protective safety equipment are some protective facilities that need to be equipped in large-scale biogas projects, as well as the following measures.
1. Operators of all posts should wear corresponding protective clothing when starting.
2. If the power supply voltage is greater than or less than 5% of the rated voltage, it is forbidden to start the large motor, and the control signal power supply should use a safe voltage lower than 36V.
3. It is strictly forbidden to wipe the running parts of the equipment during operation, and water shall not be splashed on the cable head and motor.
4. When cleaning the mechanical and electrical equipment and the surrounding environment, personnel should pay attention to safety, and pay attention to rain and snow.